Belkin International, Inc.
is a popular producer of consumer electronics that is dedicated in providing
connectivity devices. The company was incorporated in 1983 in Hawthorne, CA, by
Chet Pipkin and is currently based on Playa Vista, Los Angeles, CA. It markets
various consumer and commercial product ranges that include routers, mobile
computing accessories, iPod and iPhone accessories, networking devices, and
other peripherals. Its routers are among one of its best products for which it
is well-known brand all across the globe.
Belkin is also popular for its
tech support services and offer it to those users who need Belkin help for their networking devices. All official services are
free of cost when product is under warranty but when it has run out some of
them become paid. This support is available in the form of live and online
support, live help is asked to be paid after warranty and may be quite
expensive for a normal users. On the other hand online service continues to be
free and user can get Belkin Router support
any time from the support page. However
sometimes users may not be able to get instant resolution form the official
source and this may lead them to start looking for some other modes.
Here
are some issues with their explanations, which usually faced by users with
Belkin Routers:
Shows
"Limited Access" & "Unidentified Network" When
connecting to Router via WIFI
·
First
Check This:
o
Control Panel > Network and Sharing Center
> Manage Network Connections > right click your wireless network >
Properties
o
Under the Networking Tab, uncheck Internet
Protocol Version 6 (TCP/IPv6)
o
Exit the dialogs.
·
Then,
check the following:
o
Right click the network logo at the bottom
right of the screen and click on "Network and Sharing Center"
o
Click "Manage Network Connections"
on the left
o
Right click your wireless network and select
"Properties"
o
Click on "Internet Protocol Version 4
TCP/IPv4" and click "Properties" beneath it
o
Select "Obtain an IP address
automatically" and click "OK"
·
After
That,
o
Click on start menu>RUN and click ok
o
Right click the appropriate connection and
click Diagnose and Repair.
o
Command prompt flashes, restart your computer
DSL
(ADSL) Link light is not glowing or it is blinking and goes off: This
mostly occurs when network is low or breaking. To resolve it check whether any
loose connection is there in splitter and modem. Ensure that ADSL/Modem port of
Splitter connected to DSL port of the modem
Unable
to browse in Laptop via wire-less:
·
Check whether “Wireless is turned ON” or NOT
in your laptop. You may have to press Function key & F2 or F5 (Any wireless
symbol) keys or Wireless button or Blue tooth button of your Laptop to Turn
ON/OFF the “wifi”,
·
Check whether your Wireless adapter is in
enabled state or not. Remove Ethernet cable & ping 192.168.1.1 to check
whether modem is communicating with your Laptop through wireless connection
The author is an expert Belkin router Help executive with
a popular third party support provider. Those who are unable to call up BelkinRouter Support Number can always seek his advice for dealing with their router
issues.
No comments:
Post a Comment